Shopping cart
You have no items in your shopping cart.


13 May, 2020 - 0 Comments

Download the pattern from here.

The Kiddie Pouch is a super easy pouch that is suitable for both beginners and advanced sewers, and is perfect for gift-giving. The pouch uses little fabric and can be made in just an hour. The Kiddie Pouch is named for its small size and cute potbelly design, and is loved, not only by children, but by adults as well. The zipper closing makes this pouch extremely child-friendly, as no amount of swinging or throwing will allow the items to fall out of the pouch. The interesting thing about the design of this pouch is that it matches well with all different kinds of fabric patterns; it is mainly this- the choice of fabric- that gives each pouch its own unique feel. The Kiddie Pouch is ideal for use as a coin purse, but may be used in other, more creative ways as well.

FINISHED SIZE: 4" width x 3 1/2" height

44” wide heavyweight home decorator OR quilting weight cotton
(1/8) Yard for exterior fabric
(1/8) Yard for solid fabric
(1/8) Yard for lining
(1/8) Yard of 44” wide medium weight fusible interfacing
(1) 4” All-purpose zipper
(1) Spool of coordinating thread
8 1/2” Ribbon for loop (Optional)

Ruler, Scissors, Chalk pencil, Pencil, Sewing machine, Pins, Needle, Shape tool

* Seam allowance 1/2” unless otherwise specified.
* All units are in inches.

Cut out the Fabric
Draw the patterns directly onto the wrong side of a single layer of fabric. Cut out the exterior and lining. If you would like to add an interfacing, draw and cut it out. Fuse the interfacing on the wrong side of the exterior front and back pieces following the manufacturer’s guide.
(2) Front and Back Pieces
(1) Loop Piece (Optional)
(2) Lining Front and Back Pieces
(2) Front and Back Pieces

Make the Darts

1) Fold the exterior front piece triangle darts, pin and sew the darts, backstitching on both ends. Cut the dart seam. Repeat this process for the lining.

2) For an optional strap, lay a ribbon vertically across the center of the exterior back piece’s right side. Fold it in half to create a loop; pin and baste the ribbon.

Attach the Zipper

1) Zip the zipper and lay it on the exterior front with right sides together. You will be able to see the wrong side of the zipper. Measure the length of the zipper coil and tape only on one side. If the excess length is over 1/2”, cut off any excess tape. Pin the zipper and panel in place. Stitch the panel and zipper using a zipper foot, sewing close to the tape edge. Backstitch to secure.

2) Place the lining piece onto the zipper and exterior with right sides together. The zipper will now be between the exterior and lining. Pin and sew the zipper close to the coils. Backstitch on both ends.

3) After sewing the lining to the zipper, flip the lining towards the exterior with wrong sides together and press. Topstitch the exterior close to the coils.

4) Sew the exterior back piece onto the zipper in the same manner.

5) Sew the lining back piece onto the zipper in the same manner.

6) The result should look like this.

Sew the Exterior and Lining

1) Place the exterior front and back pieces with right sides together. Also place the lining front and back pieces with right sides together. To make it easier to turn the pouch right side out, leave the zipper open when sewing around the bag. Pin and sew along the exterior and lining seam, backstitching several times over the zipper and leaving a small gap for turning.

2) Clip the curved corner seams. The zipper coil should be towards the lining.

Assemble the Exterior and Lining

1) Trim the corner seam.

2) Turn the pouch right side out and fold the opening seam allowance inside. Pin and stitch the lining opening.

3) Tuck the lining into the exterior. If necessary, push out the corners with a turning tool or capped pen.

Comments (0)